SIL335 gas maker blue 100%RTV/1*12
FEATURES:
- The Industro Gasket Maker is a high-quality silicone-based sealing compound that cures at room temperature, forming a tough, elastic rubber seal.
- Forms a tough and elastic silicone rubber for superior sealing.
- Temperature resistant from -50°C to +330°C for short periods.
- Chemically resistant to: Petrol, Diesel, Paraffin, Water, Oil, and Anti-Freeze.
- Not for use on parts continuously immersed in petrol.
- Non-corrosive.
- Has no negative impact on electrical components.
Application:
- Step 1: Clean: Surfaces to be sealed must be cleaned and degreased.
- Step 2: Apply: Apply Industro Gasket Maker in one continuous bead to only one of the mating surfaces. Ensure all bolt holes are encircled.
- Note: To ensure a proper seal, do not apply Industro Gasket Maker between surfaces that are already fitted. Also, ensure that the applied bead is continuous with no air gaps appearing in the bead.
- Step 3: Assemble: Assemble the mating surfaces and tighten the bolts as soon as possible (Industro Gasket Maker will begin to skin within 40 minutes).
- Step 4: Cure: Allow 24 hours for full cure.
- Step 5: Store: Replace the cap after use.
No reviews found